Samsung Transform Ultra Forum

Root Sprint/Boost ## codes for the Transform Ultra

This is a list of codes that i have narrowed down from hundreds of various list. The ones below are codes that i have tested and can confirm that they worked.

Use these codes at YOUR OWN RISK!!! By using the codes, you understand that I am not liable for any or all consequences of the codes below.


Code (Text):
  1. *#7780#

This code can be used for a factory data reset. It'll remove following things:
Google account settings stored in your phone
System and application data and settings
Downloaded applications
It'll NOT remove:
Current system software and bundled applications
SD card files e.g. photos, music files, etc.
PS: Once you give this code, you get a prompt screen asking you to click on "Reset phone" button. So you get a chance to cancel your operation


Some of the codes below needs your MSL code.

Codes to launch various Factory Tests:
*#0*# - LCD test
*#0673# - Melody test[/B]
*#0842# - Device test (Vibration test)
*#2663# - Touch screen version
*#0588# - Proximity sensor test
*#3264# - RAM version
##8778# - Bootloader
##33284# - Shows the cellular radio debug info, signal etc...
##72786# - changes DSA back to Factory Close to a hand free activation.
*#0228# - Battery Status
*#2663# - Main firmware update
*#7450# - Phone Dump Mode Disable
*#7451# - Phone Dump Mode Enable
*#06# - Displays MEID
 

Related:

#1 chevanlol360, Mar 16, 2012
Mind if I quote you for the general info sticky?

edit - nevermind I think I'd prefer to link to this..
 
#2 Loota, Mar 16, 2012
Either way its fine with me Loota:D
 
#3 chevanlol360, Mar 16, 2012
interesting... when using the touchscreen test in the LCD test the. touchscreen doesn't screw up like it usually does
 
#4 gkak, Mar 16, 2012
*#2663# listed twice. Does a different code give you touch screen version?

Screws up for me on both touch screen tests.
 
#5 KydDynoMyte, Mar 16, 2012
in *#0*# screentest I can drag for about 15 seconds before it skips . with *#2663# I get an option for firmware update . debating whether I should accept
 
#6 gkak, Mar 17, 2012


I confirm! With significant pressure I cannot get it to skip.. only skips with easy pressure.
Using *#0*# touch
 
#7 smith058, Mar 17, 2012
I tested again and again.... this is great news.... we need to look into this!

It actually works..... yeah!!!!! :)
 
#8 smith058, Mar 17, 2012
Yeah i definitely see a difference with it too.
 
#9 chevanlol360, Mar 17, 2012
I would like to see if there is a *#2663# - Main firmware update available I am on Sprint and already have a problem with battery/USB any suggestions? Any ideas if it would just hurt more? Go for it or just forget about it and wait til I get a new phone? :thinking:
 
#10 cwgraf71, Mar 19, 2012
Theres no firmware update available at this time. Wait till you get a new phone.
 
#11 chevanlol360, Mar 19, 2012
Are there any other codes?
 
#12 gpotvin, Mar 21, 2012
Nope nothing new
 
#13 chevanlol360, Mar 21, 2012
what does the ##33284# change DSA do?
 
#14 tripdoc79, May 7, 2012
##33284# is a test and settings menu for different things becareful here its buggy do not change or use menu items unless you know what they're for . ##72786# does what your asking. it resets the network setting to factory if you run into a network error .
chev i'm having problems ( every modded rom i've used the evdo setting gets the error 7) with ##33284# others / hrd/1x / evdo .
 
#15 reapert, May 7, 2012
if u use the *#0*# code and choose "touch" u can see the greatness that is bobZhome's new kernel. no more skips
 
#16 gkak, May 8, 2012
I am new to all this I think someone else or a program like a treacer had control over my cell. Boost just did an update and now I do not have any signal besides wifi any help plz...
 
#17 rellic, Sep 2, 2012
I was trying to fix my incoming calls and the tech had me go to the MIN settings to enter the MIN number and my phone number..... Anyone know what the # number is for that?
 
#18 alpha2k, Jan 15, 2014
Note: Most of these codes dont work on curtain roms
 
#19 cmtoontown, Feb 14, 2014
Hi.I have this code I used (#72786##) is how to the previous state to go back because now antenna!?
 
#20 Sinful7, Jun 26, 2017