How to fix Hard-bricked/Dead Yuphoria using SD Card

How to fix Hard-bricked/Dead Yuphoria using SD Card
I've faced this issue and also fixed my dead Yuphoria by SD card method. So I made a video for all of you guys. Hope you would like it. 

Queries and success stories are welcomed in comment box.

Requirements :-

1. EMMC Dump -

2. 7zip software -

3. Win32 Disk Imager -

4. CyanogenOS Fastboot ROM -

5. Flashing Tool -

Steps of flashing ROM via Fastboot

1. Extract COS ROM and flashing tools files in one folder. 

2. Double click flash-all.bat file. 

3. This will flash the rom on your phone.

If you're getting waiting for device error then watch this -

Fix for SD Card to original state -


Ask for any video on FB -
Follow me on Insta -

Music Provided by NoCopyrightSounds
JJD - Adventure [NCS Release]

RRelated Posts

How to unbrick Hardbricked Yureka or Yureka plus

This video is tested on Hardbricked Yureka plus and it will work both for Yureka and Yureka plus. For Emmc Burning and Drivers refer this video. Cm12 firmware Yureka


  • Yushan Ghai
    Give me link for IMG file link yu yureka
  • Yushan Ghai
    Bro this method used in yu yureka also?
  • Know Something New
    hi irfo tech i have problem
    in yuphoria twrp is showing 0 mb internal storage i give to normal shop or srevice center (not yu service center) they tell me that software problem and they tried flashing rom via fastboot

    but no success why twrp is showing 0 mb?????

    is your method work for me ????? pls tell and 16 gb memory card is enough for this????
    please reply yu phoria is my primary device i want it back as soon as possible please please please help me..................................... reply me
  • bharath lingam
    can i use 16gb sd
  • Tanmay Gawde
    My yuphoria showing 0mb internal storage and unable to mount data
  • prudhvi chotu
    can we do it with 16gb sd card..i dont have 32
  • naeem khan
    Sir My yu4711 is dead in flash .
    Only vibrating this method working my phone
  • STARKS reloded
    hello i did everything but when i open flash all.bat it shows "waiting for device"
  • Dar Zeeshan
    thanks..... bro....,
  • bharath lingam
    bro I have 64gb card can I use
  • Dar Zeeshan
    yes means.....USB debbing on hona zarooori nhi hai...
  • Dar Zeeshan
    sir kya phone mein khud detect hoga bootloader .....without enabling on USB debugging
  • Dar Zeeshan
    sir..does it work for yu 5010a
  • Gourav Ahlawat
    You can fix my samsung gt7262 deadboot .........

    Please help.......
  • Prasad Budda
    Ok..bro there any same method for tablet??
  • Ranjeeet Mandal
    I successfully completed the full process step by step...but still my Yuphoria is stuck on the YU logo ...can anybody help
  • Harshit sharma
    My yuphoria is showing 0mb in recovery and when I wipe or flash anything it shows unable to mount storage data cache system
    I tried flashing stock rom through pc but it showed 'failed' & again stucked at yu logo
    PLZ HELP!!!!
  • Prasad Budda
    This method can I use my tablet...device??bro
  • Amit Singh
    Hey there, In my twrp recovery it is showing internal storage 0 mb,can't falsh system tried flashing stock firmware still no luck, Will your method help me out?
  • Jagadish R
    what is use of those 10 img...? should I xtract everything or any one..?
  • Veer Bharda
    mere phone me sirf logo hi aa rha he bhai
  • Chotu Darling

  • Aakash Chouhan
    Fastboot mode pe kaise hoga
  • Aakash Chouhan
    Hlo places halp me Mera mobile brick hogaya he
    The 10 files downloaded from the driver is not working.......
    When i use 7zip application its not working............
    And also the 1st file in the driver is showing as normal zip file......
    Can u repair
  • Pro GamePlay
    SDCard in USB SD-Card or in Phone?
  • Amit Kumar
    can u help me i just updated the miui rom this happen to me
  • saravanan shanmugam
    hi friend my mobile got dead condition while flash & I have tried ur guidance. It's success to fastboot & cannot flash at the time. then try to again it's got dead condition again. Now i'm not able fastboot & goes to old dead condition. Can u help me?
  • Mridul Gupta
    I had installed YU5010A_OLD_FASTBOOT_FIRMWARE_2015_LETTUCE_HUBOINC on my YU YUPHORIA 5010 to use 4GVoLTE. It worked fine for 3 months then I was facing some problem. My phone used to reboot by itself.
    So I again flashed the same file. But this time it did not flash properly.
    Now my phone when switched on is stuck on "YU YUPHORIA Powered by Android" Screen. It does not show battery charging logo also.
    When I connect it to PC the device folder does not show up in My Computer.
    When I try to flash my phone through PC the command prompt says "Waiting for Device".
    How to fix this issue and how to make it working again.
    Please help

  • Siddhartha Sharma
    Sir moto e 2014 ka bhi bta do plz
    Please go slightly slow while making this fype of video
    Because it is risky
  • Dhinakaran S
  • Dipesh Chaudhary
    hi i am in big trouble as my yu yuphoria is hardbricked and ahile flashing it gave an failed write error at last, so will this method solve the problem? please help me out as i am abroad and cannott affoard getting a new phone at the moment. so please it would be a great helif you could suggest me the solution. i tried downloading the drivers and the firmware but it doenot flash. will this sd card method work for me?
  • Nikhar Gupta
    thankq soo much bro....I almost received a heart attack when I came to know that my yuphoria has been hard bricked...😞😞but your tutorial is really worked and my mobile is also working fine...just like new.....thanks a lot bro😊😊😊
  • Ason Wang
    Does this same method work on sansung
  • Akhil Sharma
    I m stuck on waiting for device. In device manager its shows as "Android" in other devices but it does not have any driver. I try installing Samsung driver but still, it is not showing.
  • nurul hasan
    please let me know how to fix LYF flame 6???
  • Florin Marian Moraru
    My phone when i pres the power button is show me the logo and then is a white screen.When i try to enter in recovery menu again,white screen,i connect it to pc white screen.Is other way to fixit without change the motherboad.
  • Ashutosh Mohanty
    everything went as in video but the phone didnt boot after oressin vol down button?
  • Nitish Rathor
    error only 875 mb extracted
  • Amar Chandra Gorain
    after writing file to 16gb sd card I connect my Phone to computer the Android Bootloader interface is not shown in the computer and rest of the process are incomplete. what should I do?
  • Ashutosh Mohanty
    whats use of downloading 10 emmc files if first one is only needed?
  • OV
    my bootloader is locked
  • Sudhanshu Bhutani
    i am geting remote flash write error while writing system.img, rest was flowing well, not sure, what is wrong with this system.img file
  • Akhilesh kumar
    hi.. when u r executing the flashall cammand what are the other files you have in that folder cause flashtool only consist of 4 or 5 files..
  • Sam123 Ahmad
    bhai mera boot ho rha h lekin logo dikh kr band ho ja rha h please koi solution btao
  • Panku Bhai
    i followed all steps and done everything same as you but my phone is still not booting up...any solution
  • Pranay Gupta
    Hi, first Thanks for wonderful video.
    I do the same thing, but after flashing it stuck on Yuphoria logo, not going to boot, I select up volume to write the flash, in starting and in end too.
    First select down vol. , but it failed to write, so select up.
    In process shows successful okay, but takes only 2 min in writing flash.
    Please let me know , where I wrong
  • Nikhil Mulavana
    Its not working fastboot mode doesnt showing by this file on memmory card and ആࡾസࡋ when connecting the phone to pc it showing "android bootloader"...... any solution
    plzzzz helppp..........